ACSR - ALUMINUM CONDUCTOR STEEL REINFORCED

Home Products ACSR — ALUMINUM CONDUCTOR STEEL REINFORCED

ALUMINUM BUILDING WIRE

TYPE MC ALUMINUM ARMORED CABLES

MEDIUM VOLTAGE CABLES

UTILITY ALUMINUM CABLES

Bare Aluminum Cables

Service Drop Cables (Overhead)

Aluminum Service Drop Cables - Duplex

Aluminum Service Drop Cables - Triplex

Aluminum Service Drop Cables - Quadruplex

Aluminum URD Cables (Underground)

Select a section

Bare ACSR conductors are intended for use as overhead transmission, primary or secondary distribution conductor. The steel wire core and the outer aluminum wires provide an optimal balance between conductor strength and current carrying capacity, allowing for greater conductor currents at longer spans between supports. This conductor is often used as the messenger for multi conductor neutral supported conductor designs.

Aluminum alloy 1350-H19 wires concentrically stranded over a steel wire core. The steel wire core is Class A Zinc coated (Code GA2).

ASTM B230 – Aluminum 1350–H19 Wire for Electrical Purposes
ASTM B231 – Concentric-Lay-Stranded Aluminum 1350 Conductors
ASTM B232 – Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
ASTM B498 – Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors

2026-03-31

Notes:

Dimensions and weights are subject to standard manufacturing tolerances and are subject to change without notice.
Resistance is calculated using metal conductivity of 61.2% IACS for EC (1350) at 20ºC and 8% IACS for steel at 20ºC.
Ampacities are based on 75ºC conductor temperature, 25ºC ambient, 2 ft/s wind, full sun, an emissivity of 0.5 and a coefficient of solar absorption of 0.5, at sea level.