THHN/THWN-2 Aluminum Power Cable CWC LowFriction 600 V

Home Products THHN/THWN-2 Aluminum Power Cable CWC LowFriction 600 V

CWC LowFriction (R) UL Type THHN / THWN-2, Aluminum Conductor, 90°C Dry or Wet, 75°C in Oil, Rated 600 V

ALUMINUM BUILDING WIRE

TYPE MC ALUMINUM ARMORED CABLES

MEDIUM VOLTAGE CABLES

UTILITY ALUMINUM CABLES

Bare Aluminum Cables

Service Drop Cables (Overhead)

Aluminum Service Drop Cables - Duplex

Aluminum Service Drop Cables - Triplex

Aluminum Service Drop Cables - Quadruplex

Aluminum URD Cables (Underground)

Select a section

CWC LowFriction UL Type THHN / THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications in accordance with the NEC. When used as UL Type THHN, the conductor is suitable for use in dry locations at temperatures not to exceed 90°C. When used as UL Type THWN-2, the conductor is suitable for use in dry or wet locations at temperatures not to exceed 90°C or 75°C when exposed to oil or coolant. The conductor is rated 600 V. Although this product may be installed without the application of pulling lubricant, a good quality pulling lubricant is recommended.

Conductor:
Annealed compact stranded AA-8000 series Aluminum Conductor Material (ACM).
Insulation:
Low coefficient of friction, abrasion, moisture, and heat resistant colored polyvinyl chloride (PVC).
Covering:
Low coefficient of friction, abrasion, moisture, and heat resistant translucent Nylon polyamide.

600 V

Temperature Rating
90°C	Dry or Wet
75°C	Exposed to Oil

Minimum Bending Radius
Overall Diameter Less than or Equal to 1.000 in
Not Under Tension:	4x outer diameter
Under Tension (During Pull):	6x outer diameter
Overall Diameter Greater than 1.000 in
Not Under Tension:	5x outer diameter
Under Tension (During Pull):	7.5x outer diameter

ASTM B800 -- 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
ASTM B801 -- Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
UL 83 -- Thermoplastic-Insulated Wires and Cables
ICEA S-95-658 / NEMA WC70 -- Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
Federal Specification AA-59544

2026-03-31

Test

Notes:

Dimensions and weights are subject to standard manufacturing tolerances and are subject to change without notice.