CHECK OUT OUR PROMOTIONS HERE

 

Mobile Home Feeder – Aluminum Conductor

Mobile Home Feeder – Aluminum Conductor

Mobile Home Feeder – UL Type USE-2 / RHH / RHW-2, Aluminum Conductors, 90°C Dry or Wet, Rated 600 V
Toggle Icon

UTILITY ALUMINUM CABLES

Category Link Icon
  • Mobile Home Feeder Cable is mainly used for supplying the energy required within the mobile home. The cable is designed for use at 600 volts or less and conductor temperatures not exceeding 90ºC.
Mobile Home Feeder – Aluminum Conductor
  • Conductor:
  • Annealed compact stranded AA-8000 series Aluminum Conductor Material (ACM).
  • Insulation:
  • Abrasion, moisture, heat, and sunlight resistant colored crosslinked polyethylene (XLPE).
  • Assembly:
  • Cabled assembly of two phase conductors (black with one marked phase A and one marked phase B), one neutral conductor (black with three extruded white stripes), and one ground conductor (green).
Mobile Home Feeder – Aluminum Conductor
  • Colored XLPE and printed phase identification

600 V

Temperature Rating
90°CDry or Wet
Minimum Bending Radius
Overall Diameter Less than or Equal to 1.000 in
Not Under Tension:4x outer diameter
Under Tension (During Pull):6x outer diameter
Overall Diameter Greater than 1.000 in
Not Under Tension:5x outer diameter
Under Tension (During Pull):7.5x outer diameter
  • Sunlight resistant and marked
  • RoHS Compliant
  • ASTM B800 -- 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
  • ASTM B801 -- Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
  • UL 44 -- Thermoset-Insulated Wires and Cables (RHH / RHW-2)
  • UL 854 -- Service-Entrance Cables (USE-2)
  • ICEA S-95-658 / NEMA WC70 -- Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
  • Federal Specification AA-59544
  • Federal Specification JC-30B
  • UL listed as Type USE-2 -- File E487841
  • UL listed as Type RHH / RHW-2 -- File E487972

2026-03-31

Notes:
  1. Dimensions and weights are subject to standard manufacturing tolerances and are subject to change without notice.